Download
Please read the readme notes before using and installing the download. To download the file, click on the download link / filename in the last column.
Download for GIGAPORT HD
Description | Operating System | Version | Size | Date | Readme | Download |
driver and control panel | Windows XP Windows Vista 32-bit Windows Vista 64-bit Windows 7 32-bit Windows 7 64-bit Windows 8.1 32-bit Windows 8.1 64-bit |
2.7 | 2.384 KB | 2013-01-18 | readme.pdf | GIGAPORT_HDp-v2_7.zip |
Video Information
Installation under Windows Vista, Windows 7 and Windows 8
Installation under Windows XP
GIGAPORT HD+ driver installation
This driver can be used under Windows XP or with 32-bit and 64-bit Versions of Windows Vista and Windows 7/8. The following text first explains the installation under Windows Vista and Windows 7/8, followed by the installation under Windows XP, each in a different section. Please only check the corresponding section for your operating system.
Installation under Windows Vista and Windows 7/8
Disconnect GIGAPORT HD+ before you install the driver if it has been connected already. Then launch setup.exe from the unzipped downloaded driver. When launching the installation, Windows Vista or Windows 7/8 might prompt a security message. Make sure to allow the installation. You will then see a dialog as shown on the left picture below. Click Next. You can define the target directory for the installation now. Confirm it with Next.
The installer now informs you that the driver installation will start as shown on the left picture below. Confirm this with Next. During the following process you will see a Windows Security dialog box once or several times that asks you for confirmation to install the driver software. Confirm any such dialog with Install.
You will now be prompted to connect the hardware on the next dialog that is shown below. Plug in GIGAPORT HD+. Do not click OK yet. Instead, wait a few seconds for the automatic device driver installation. You can monitor this in the task notification area where Windows informs that the driver is installed via a bubble message box.
After all the mentioned steps are completed, the installation is finished. To confirm this, please check if the ESI icon is displayed in the taskbar notification area as shown below. Sometimes a reboot is required.
If yes, the driver installation has been completed successfully.
Installation under Windows XP
Disconnect GIGAPORT HD+ before you install the driver if it has been connected already. Then launch setup.exe from the unzipped downloaded driver. You will now see a dialog as shown on the left picture below. Click Next. You can define the target directory for the installation now. Confirm it with Next.
The installer now informs you that the driver installation will start as shown on the left picture below. Confirm this with Next. During the following process you will see a dialog box once or several times that informs you that the driver software has not passed Windows Logo testing. Please be assured that our drivers have been tested in various different ways and are OK to be used. Confirm any such dialog with Continue Anyway.
You will now be prompted to connect the hardware on the next dialog that is shown below on the left. Plug in GIGAPORT HD+. Do not click OK yet. During the driver installation, Windows might again prompt you to confirm the Windows Logo testing dialog once or several times with Continue Anway before the driver installation is finalized.
After all the mentioned steps are completed, the installation is finished. To confirm this, please check if the ESI icon is displayed in the taskbar notification area as shown below. Sometimes a reboot is required.
If yes, the driver installation has been completed successfully.